标题: The Volume is dirty的处理方法 [打印本页] 作者: 1000 时间: 2010-2-21 10:17 标题: The Volume is dirty的处理方法
电脑D盘有问题，老是蓝屏，再重启老是检测D盘，报：The Volume is dirty.
查了一下解决方法。
what you're experiencing is what Windows refers to as "setting the dirty bit" and what you have to do is unset that bit. Every time Windows XP starts， autochk.exe is called by the kernel to scan all volumes to check if the volume dirty bit is set. If the dirty bit is set， autochk performs an immediate chkdsk /f on that volume. Chkdsk /f verifies file system integrity and attempts to fix any problems with the volume. It is usually caused by a hard shut down or a power loss during a read-right operation on that particular drive.
How do I fix it， you ask？
Well， that's easy. First click Start> Run> bring up a command prompt by typing in "CMD" and type " fsutil dirty query d： ". This queries the drive， and more than likely it will tell you that it is dirty. Next， type "CHKNTFS /X D：". The X tells Windows to NOT check that particular drive on the next reboot. At this time， manually reboot your computer， it should not do a Chkdsk and take you directly to Windows.
Once Windows has fully loaded， bring up another CMD prompt and type and now you want to do a Chkdsk manually by typing "Chkdsk /f /r d：". This should take you through 5 stages of the scan and will unset that dirty bit. Finally， type "fsutil dirty query d：" and Windows will confirm that the dirty bit is not set on that drive.
英文翻译
1）在"开始"-->"运行"下键入：cmd，进入msdos下，使用fsutil dirty query d： 来检查d盘，报：The Volume is dirty.再键入CHKNTFS /X D：，报该盘分区NTFS.然后直接在运行处运行这个命令，没发现有什么效果。
